nicht angemeldet
Es kann sein, dass mod_rewrite nicht eingebunden ist als mod. Hab kurz reingeguckt. In den Dateien wo die module eingebindet werden steht kein mod_rewrite.
Hier ist meine httpd.conf:
#
# /etc/apache2/httpd.conf
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
# Based upon the default apache configuration file that ships with apache,
# which is based upon the NCSA server configuration files originally by Rob
# McCool. This file was knocked together by Peter Poeml <poeml+apache@suse.de>.
# If possible, avoid changes to this file. It does mainly contain Include
# statements and global settings that can/should be overridden in the
# configuration of your virtual hosts.
# Overview of include files, chronologically:
#
# httpd.conf
# |
# |-- uid.conf . . . . . . . . . . . . . . UserID/GroupID to run under
# |-- server-tuning.conf . . . . . . . . . sizing of the server (how many processes to start, ...)
# |-- sysconfig.d/loadmodule.conf . . . . . [*] load these modules
# |-- listen.conf . . . . . . . . . . . . . IP adresses / ports to listen on
# |-- mod_log_config.conf . . . . . . . . . define logging formats
# |-- sysconfig.d/global.conf . . . . . . . [*] server-wide general settings
# |-- mod_status.conf . . . . . . . . . . . restrict access to mod_status (server monitoring)
# |-- mod_info.conf . . . . . . . . . . . . restrict access to mod_info
# |-- mod_autoindex-defaults.conf . . . . . defaults for displaying of server-generated directory listings
# |-- mod_mime-defaults.conf . . . . . . . defaults for mod_mime configuration
# |-- errors.conf . . . . . . . . . . . . . customize error responses
# |-- ssl-global.conf . . . . . . . . . . . SSL conf that applies to default server _and all_ virtual hosts
# |
# |-- default-server.conf . . . . . . . . . set up the default server that replies to non-virtual-host requests
# | |--mod_userdir.conf . . . . . . . . enable UserDir (if mod_userdir is loaded)
# | `--conf.d/apache2-manual?conf . . . add the docs ('?' = if installed)
# |
# |-- sysconfig.d/include.conf . . . . . . [*] your include files
# | (for each file to be included here, put its name
# | into APACHE_INCLUDE_* in /etc/sysconfig/apache2)
# |
# `-- vhosts.d/ . . . . . . . . . . . . . . for each virtual host, place one file here
# `-- *.conf . . . . . . . . . . . . . (*.conf is automatically included)
#
#
# Files marked [*] are created from sysconfig upon server restart: instead of
# these files, you edit /etc/sysconfig/apache2
# Filesystem layout:
#
# /etc/apache2/
# |-- conf.d/
# | |-- apache2-manual.conf . . . . . . . conf that comes with apache2-doc
# | |-- mod_php4.conf . . . . . . . . . . (example) conf that comes with apache2-mod_php4
# | `-- ... . . . . . . . . . . . . . . . other configuration added by packages
# |-- default-server.conf
# |-- errors.conf
# |-- httpd.conf . . . . . . . . . . . . . top level configuration file
# |-- listen.conf
# |-- magic
# |-- mime.types -> ../mime.types
# |-- mod_autoindex-defaults.conf
# |-- mod_info.conf
# |-- mod_log_config.conf
# |-- mod_mime-defaults.conf
# |-- mod_perl-startup.pl
# |-- mod_status.conf
# |-- mod_userdir.conf
# |-- mod_usertrack.conf
# |-- server-tuning.conf
# |-- ssl-global.conf
# |-- ssl.crl/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificate Revocation Lists (CRL)
# |-- ssl.crt/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificates
# |-- ssl.csr/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificate Signing Requests
# |-- ssl.key/ . . . . . . . . . . . . . . PEM-encoded RSA Private Keys
# |-- ssl.prm/ . . . . . . . . . . . . . . public DSA Parameter Files
# |-- sysconfig.d/ . . . . . . . . . . . . files that are created from /etc/sysconfig/apache2
# | |-- global.conf
# | |-- include.conf
# | `-- loadmodule.conf
# |-- uid.conf
# `-- vhosts.d/ . . . . . . . . . . . . . . put your virtual host configuration (*.conf) here
# |-- vhost-ssl.template
# `-- vhost.template
### Global Environment ######################################################
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests.
# run under this user/group id
Include /etc/apache2/uid.conf
# - how many server processes to start (server pool regulation)
# - usage of KeepAlive
Include /etc/apache2/server-tuning.conf
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog /var/log/apache2/error_log
# generated from APACHE_MODULES in /etc/sysconfig/apache2
Include /etc/apache2/sysconfig.d/loadmodule.conf
# IP addresses / ports to listen on
Include /etc/apache2/listen.conf
# predefined logging formats
Include /etc/apache2/mod_log_config.conf
# generated from global settings in /etc/sysconfig/apache2
Include /etc/apache2/sysconfig.d/global.conf
# optional mod_status, mod_info
Include /etc/apache2/mod_status.conf
Include /etc/apache2/mod_info.conf
# optional cookie-based user tracking
# read the documentation before using it!!
Include /etc/apache2/mod_usertrack.conf
# configuration of server-generated directory listings
Include /etc/apache2/mod_autoindex-defaults.conf
# associate MIME types with filename extensions
TypesConfig /etc/apache2/mime.types
DefaultType text/plain
Include /etc/apache2/mod_mime-defaults.conf
# set up (customizable) error responses
Include /etc/apache2/errors.conf
# global (server-wide) SSL configuration, that is not specific to
# any virtual host
Include /etc/apache2/ssl-global.conf
# forbid access to the entire filesystem by default
#<Directory />
#Options None
#AllowOverride None
#Order deny,allow
#Deny from all
#</Directory>
<Directory />
Options -Indexes +FollowSymLinks +Includes
AllowOverride All
</Directory>
# use .htaccess files for overriding,
AccessFileName .htaccess
# and never show them
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# List of resources to look for when the client requests a directory
DirectoryIndex index.html index.html.var
### 'Main' server configuration #############################################
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
Include /etc/apache2/default-server.conf
<IfModule mod_suphp.c>
suPHP_Engine on
php_admin_flag engine off
AddType application/x-httpd-php .php
AddType application/x-httpd-php .php3
AddType application/x-httpd-php .php4
AddHandler x-httpd-php .php
DirectoryIndex index.php
DirectoryIndex index.php3
DirectoryIndex index.php4
</IfModule>
# Another way to include your own files
#
# The file below is generated from /etc/sysconfig/apache2,
# include arbitrary files as named in APACHE_CONF_INCLUDE_FILES and
# APACHE_CONF_INCLUDE_DIRS
Include /etc/apache2/sysconfig.d/include.conf
### Virtual server configuration ############################################
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
Include /etc/apache2/vhosts.d/*.conf
<VirtualHost _default_:443>
DocumentRoot /usr/local/visas/public_html/
ServerName meine-seite.de
ServerAlias www.meine-seite.de
php_admin_value open_basedir /usr/local/visas/public_html/ssl/
php_admin_value engine off
IndexOptions
DirectoryIndex index.htm index.html index.shtml start.htm start.html start.shtml index.php index.php3
SSLEngine on
SSLCertificateFile /etc/apache2/ssl.crt/server.crt
SSLCertificateKeyFile /etc/apache2/ssl.key/server.key
Redirectpermanent /adminlevel https://meine-seite.de:22222/adminlevel
Redirectpermanent /domainadminlevel https://meine-seite.de:22222/domainadminlevel
Redirectpermanent /serveradminlevel https://meine-seite.de/serveradminlevel
Redirectpermanent /mail https://meine-seite.de:22222/webmail
Redirectpermanent /webmail https://meine-seite.de:22222/webmail
Redirectpermanent /support https://meine-seite.de:22222/support
Redirectpermanent /mysql https://meine-seite.de:22222/mysql
</VirtualHost>
<VirtualHost *:80>
DocumentRoot /usr/local/visas/public_html/
ServerName meine-seite.de
ServerAlias www.meine-seite.de
php_admin_value open_basedir /usr/local/visas/public_html/ssl/
php_admin_value engine off
SSLEngine off
IndexOptions
DirectoryIndex index.htm index.html index.shtml start.htm start.html start.shtm index.php
Redirectpermanent /adminlevel https://meine-seite.de:22222/adminlevel
Redirectpermanent /domainadminlevel https://meine-seite.de:22222/domainadminlevel
Redirectpermanent /serveradminlevel https://meine-seite.de:22222/serveradminlevel
Redirectpermanent /mail https://meine-seite.de:22222/webmail
Redirectpermanent /webmail https://meine-seite.de:22222/webmail
Redirectpermanent /support https://meine-seite.de:22222/support
Redirectpermanent /mysql https://meine-seite.de:22222/mysql
Redirectpermanent /ssl https://meine-seite.de/ssl/
</VirtualHost>
Include /usr/local/visas/etc/subdomains.conf
Die .htaccess Datei wird auch nicht komplett ignoriert. Es kommt ein Fehler 500 wenn eine falsche Syntax in der .htaccess Datei ist. Jedoch werden halt die php-Werte nicht geändert.
Hier noch meine .htaccess Datei:
#
# Set
#
# AllowOverride FileInfo
#
# to enable parsing off this file
#
php_value memory_limit 32M
php_value max_execution_time 60
php_flag register_globals Off
php_flag magic_quotes_gpc Off
php_flag magic_quotes_runtime Off
# settings for the file upload, you might increase them further
php_value upload_max_filesize 16M
# session handling: now the check for expired sessions is done on every 10th session creation
php_flag session.use_trans_sid Off
php_value session.gc_probability 1
php_value session.gc_divisor 10
# multibyte extension: needed for utf-8
php_value mbstring.func_overload 7